As-built drawings from laser scans
We laser scan the building as it stands and draw the existing conditions your team needs: floor plans, reflected ceiling plans, elevations, sections, roof and site plans. Every line is checked against the point cloud, so you design from measured facts instead of old permit sets.
What we draw
- Floor plans with walls, openings, stairs, built-in casework and fixtures
- Reflected ceiling plans with soffits, beams, ceiling heights and visible fixtures
- Exterior and interior elevations
- Building sections through the areas you plan to change
- Roof plans with pitches, ridges and equipment
- Site plans with grades, walls, trees and hardscape
Formats
AutoCAD (DWG) on your layers and title block, sheets in your Revit set, or SketchUp (SKP). The registered point cloud comes with every job, so you can measure anything we did not draw.
Why scan instead of measuring by hand
A tape survey records the points someone thought to measure. A laser scan records everything in view, millions of points per room, including out-of-square walls, sloped floors and ceiling changes that hand notes miss. If a question comes up during design, you check the point cloud instead of driving back to the site.
Accuracy
We state accuracy on the USIBD Level of Accuracy scale. By default the point cloud is LOA30 (5/8 in to 1/4 in) and the architectural model is LOA20 (2 in to 5/8 in), both at two standard deviations. Critical elements can be held to LOA40 with survey control. Read LOA in plain English for what each level means on a project.
What every job includes
- One site visit with a Leica RTC360, a NavVis MLX or both, inside and out
- A registered point cloud (RCP, RCS, E57 or PTS) and an interior virtual tour, about 3 business days after the scan
- A work-in-progress model review, then the final model and drawings in your template
- A registration report and a cloud-to-model deviation map with every model
- Four updates: scan date confirmed, scan passed QA, model in production with its delivery date, and delivered
More services
Related: as-built drawings, point cloud to Revit, ADU and remodel as-builts, tenant improvement as-builts, laser scanning for steel fabricators and what changes the cost.
As-built drawing questions
Can you match our CAD standards?
Yes. Send your layers, title block or Revit template before the scan and we draw to it.
Do you show property lines?
No. Property lines come from a licensed land surveyor. A laser scan shows what is built, not where the line is.
What if part of the building is locked?
Areas we cannot see or reach on scan day are listed in the delivery, so nothing in your drawings is guessed silently.
How do I get a price?
Send the address, rough square footage and what you need drawn. We reply the same day with a quote. A typical single-family home is $3,840 to $4,320, and larger or more complex buildings get a custom quote.